post-image

How to paint your own wedding picture

Decorative Products

From a few years ago, the only thing I could see as a wedding photographer was an eye-patch, so I decided to paint my own wedding photo.

The first step was to design a frame, but there were a few things I wanted to take into account when I started.

My bride-to-be was a tall, slender woman with brown hair and blue eyes.

When I got the frame I knew I wanted a portrait frame, so it had to be framed in the right way.

It had to sit high enough to get her nose and cheek level with her face and not be too far away from her cheekbones.

I wanted her face to be angled slightly upward to show her face was not at the same angle as her face, so that her mouth was just a few inches above the top of her head.

Then, I wanted her eyes to be as close as possible to her cheekbone.

To do that I would need a very wide angle lens, so the camera was at the widest angle possible.

This meant that the lens needed to be positioned at an angle that gave me the best possible angle to capture her face from behind the lens.

That means a camera that can capture a person’s face from a distance of 15 to 20 metres away, and has a focal length of 1 metre.

At this point, I started looking at some wedding photography products.

A few months ago, I purchased a Canon 1D MkIII with a 70-200mm lens, which I used for all my portraits.

While I like Canon’s prime lenses, I found the 70-300mm lens to be a little too big for my needs.

As I had a lot of photographs taken, and was looking for something smaller, I also bought the Canon 50mm f/1.4 lens, and it works very well for wedding portraits.

Tags:
,