Blue-gray paint is the paint that makes your favorite surfers look like they’re standing on top of a giant blue ocean wave, but what exactly is it and how do you use it to create amazing waves?
In short, it’s basically a blend of watercolor and acrylic.
It can be used as a base for a brush painting or to add some subtle shading to your painting.
It’s not the easiest thing to do, but it can be quite rewarding.
Step 1: Find the right colorThe first step is to find the right paint to start with.
There are a lot of great options, and you’ll want to find something that’s both opaque and water-based, but not too much that makes it look like water.
If you’re painting on a piece of acrylic, you’ll need to be careful with the amount of paint you’re using, and if you have to do any work to the surface, you may have to get creative.
If you don’t have the right piece of paint, you can find paint that’s cheaper and easier to work with, like some of the cheap, water-soluble paints on Amazon.
You’ll want a mix of water and non-water based paints, like acrylics and lacquer, to get the best results.
Step 2: Paint the wavesNow you’ll be ready to start painting the waves.
You can start by painting a wave, or you can start with a blank piece of paper or cardboard, and paint the waves using the colors that will look best on the wave.
You want to be sure that the paint you use doesn’t contain too much paint, so it’s not too dark or too light.
Step 3: Select the paint and add shadingOnce you’ve got the wave painted, it should look a bit like this:Now you can go ahead and add some shading.
You might want to add a small bit of white to the edges, or a little bit of light brown to the front.
The idea is to get a sense of where you want the waves to go and how they should look when they’re fully created.
If your wave doesn’t look great, you might want a little more shading, but the paint shouldn’t be too heavy.
The goal is to make the waves as clean and uniform as possible, and then add some little shading to give them a bit of texture.
Step 4: Apply the paintTo start, you want to apply the paint in a very thin layer.
If your paint will be on the board, or your surfboard, or in the water, apply it with a paintbrush.
If it’s a paint brush, you should only be applying a small amount of the paint to the wave, so that you can see what you’re doing.
You should also apply the top coat to the top half of the wave so that the surface is completely dry.
Step 5: Add the wavesStep 5 will look like this.
You may notice that it’s taking a while to apply all of the waves, because there are so many of them.
When the painting is done, it’ll look like these:Now, when you’re done painting, you’re ready to add the waves!
You’ll need a paint mixer, like a brush, a roller brush, or even a paint roller, and a spray can or tube to add more paint.
You also might want some tape to help prevent damage to the waves once they’re done.
If all went well, you have your perfect wave!
And, as usual, it really is that good.